“Skytech 5301P: Touch Screen Fireplace Remote with Programmable Thermostat”: Available now at [price_with_discount]

The Skytech 5301 P fireplace remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. The system can be operated thermostatically or manually from the transmitter. The system operates on radio frequencies (RF) within a 20 foot range using non-directional signals. The system operates one of 1,048,567 security codes that are programmed into the transmitter at the factory; the remote receiver’s code must be matched to that of the transmitter prior to initial use. SKY-5301P allows you to easily program your fireplace to run on a pre programmed schedule throughout the week.For gas fireplaces only. 3-Button Prog/Mode/Set Backlit LCD touch screen transmitterBacklit LCD displays room and set temp, flame icon, and low battery indicatorBattery powered receiver box with learn function and On/Remote/Off slider switchReceiver can be installed in wall, on the hearth or under the fireplace behind the control access panelIncludes transmitter, receiver, wall plate, installation instructions, batteriesFor gas fireplaces only.

The Skytech 5301 P fireplace remote control system is designed to provide a safe and user-friendly way to control gas heating appliances. The system features a three-button programmable and backlit LCD touch screen transmitter, allowing for thermostatic or manual operation within a 20-foot range. The remote operates on non-directional RF signals and utilizes one of over a million security codes for added safety and security. The receiver box is battery-powered with a learn function and On/Remote/Off switch, and can be easily installed in various locations. The system also allows for programming the fireplace to run on a schedule throughout the week. This remote control system is specifically intended for use with gas fireplaces only. Overall, the Skytech 5301 P provides a convenient way to control your fireplace with ease and peace of mind.

Price: $158.99
(as of Aug 13, 2024 18:19:49 UTC – Details)


Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts
Read More

“ASUS ROG Ergo Monitor Arm: Cable Management, Ergonomic Design, Adjustable Height – Perfect Desk Setup”: Available now at [price_with_discount]

ROG Ergo Monitor Arm is designed for compatibility with a wide range of monitors. It can handle up to 39-inch monitors, supporting flat monitors with a maximum weight of 23.35 pounds (11.5 kg) or curved monitors weighing up to 18.74 pounds (8.5 kg). The mechanical spring system of the ROG Ergo Monitor Arm allows for smooth, effortless adjustments through a wide range of movements. Tilt, swivel, or pivot the monitor to the desired position.
Wide-ranging compatibility: Accommodates up to 39-inch monitors weighing 6.6–23.35 pounds, and works with VESA 100 x 100 mm mounts
Full range of motion: A mechanical spring system allows for height, tilt, and swivel adjustments
Easy to set up and reliable: Installation is quick, and stringent durability testing in the design phase, including a 10,000-cycle range of motion test, ensures reliability
Up to 39-inch monitors, supporting flat monitors with a maximum weight of 23.35 pounds (11.5 kg) or curved monitors weighing up to 18.74 pounds (8.5 kg)
Read More

“Waveshare 4″ HDMI Touch Display: Compatible with Raspberry Pi and Jetson Nano”: Available now at [price_with_discount]

Product Description 4" HDMI Touch Display 4" HDMI Touch Display 4inch HDMI LCD (C) 4inch HDMI LCD (C)

Raspberry Pi

Supports Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie Driver free for USB-C touch Config file is required for I2C touch

Supports all versions of Raspberry Pi

Jetson Nano

Supports Ubuntu

PC

Supports Windows 11 / 10 / 8.1 / 8 / 7

for Jetson Nano and PC, only USB-C touch is available

3 3

Features

4inch IPS screen,480×800 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero / Zero 2 W, an additional HDMI cable is required) Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems. Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) OSD menu, supports brightness/contrast ratio adjustable manually.

4 4 5 5

Hardware Connection

1. Connect the GPIO interface

Raspberry Pi leads out 40 GPIO pins, while the screen leads out 26 pins. When connecting, pay attention to the corresponding pins and Raspberry Pi pins.

2. Connect the HDMI connector to the HDMI port of the screen and the Pi.

3. Turn the Backlight on the back of the LCD to "ON".

Note: Raspberry Pi Zero / Zero 2 W needs an additional HDMI cable for connection.

6 6
Provide online user manual, please check the manual carefully before using!
Supports all versions of Raspberry Pi. For Jetson Nano and PC, only USB-C touch is available
4-inch IPS screen, hardware resolution is 720×720. 5-point capacitive touch, tempered glass panel, hardness up to 6H.
When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie. Ubuntu is supported when used with Jetson Nano.
When used as a computer monitor, it supports Windows 11/10/8.1/8/7. Onboard dual touch circuit, optional USB Type-C or I2C touch, it has more application scenarios. With 3.5mm audio and speaker interface, it support HDMI audio output.
Read More

“Soft Silicone Case for Miyoo Mini Retro Handheld Game Console: White”: Available now at [price_with_discount]

Product parameters:
Name: Protective cover
Applicable models:for Miyoo Mini
Size: 6.9x9.5x2cm
Colour:Black,White,Purple
Weight with package: 30.4g

Product list:
1*protective sleeve
1* Lanyard

Note:Protective case only, does not include the game console shown in the picture.

Silicone Case Specifically designed for Miyoo Mini console.
Made of high quality and environment-friendly silicone material, soft and durable in use.
It provides full protection for your device, anti-scratch, dust-proof and shockproof.
It protects the machine from dust, scratches, bumps and damage.
With lanyard, easy to carry.
Read More

Renewed Skytech Shadow Gaming PC: Ryzen 3 3100, GTX 1660, 16GB RAM, 1TB SSD: Available now at [price_with_discount]

This pre-owned or refurbished product has been professionally inspected and tested to work and look like new. How a product becomes part of Amazon Renewed, your destination for pre-owned, refurbished products: A customer buys a new product and returns it or trades it in for a newer or different model. That product is inspected and tested to work and look like new by Amazon-qualified suppliers. Then, the product is sold as an Amazon Renewed product on Amazon. If not satisfied with the purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee.
✔ 6 Months Warranty on Parts and Labor | Lifetime Free Technical Support | Assembled in the USA | This powerful gaming PC is capable of running all your favorite games such as World of Warcraft, League of Legends, Grand Theft Auto V, Apex Legends, Fortnite, Roblox, PLAYERUNKNOWN’s Battlegrounds, Overwatch, Counter-Strike: Global Offensive, Battlefield V, Minecraft, The Division 2, and more at High to Ultra settings, crisp 1440p Full HD resolution and smooth 60+ FPS game play.