Redragon K631 PRO 60% Keyboard and M991 Gaming Mouse Bundle: Available now at [price_with_discount]

Product description Compatibility Windows 10 (1903) and above, Android 9.0 and above Connectivity 2.4G - Windows, Wired USB - Windows, Bluetooth BLE - Android Joysticks HallPi TMR joysticks Triggers Tactile and Hall Effect Linear Trigger Polling rate 1000Hz on both 2.4G and wired connections R4/L4 bumpers & PL/PR buttons Programmable and Mappable, Refined 6-Axis motion control Customizable 6-axis motion control, supported on both Windows and Android, can be configured as the left joystick / right joystick through the Ultimate Software V2. Vibration Rotor motor vibration, asymmetric vibration Turbo function D-pad, Joysticks, Home buttons, L4/R4 and PR/PL are not supported RGB Fire Ring Fire Ring Mode, Light-tracing Mode, Rainbow Ring Mode Battery 1000mAh built-in battery pack Dimension/Weight 147*103*61.3 mm, 246g Package Contents Ultimate 2 wireless controller * 1, Charging dock * 1, 2.4G USB-C adapter * 1, USB cable (1 meter) * 1, Manual * 1 Support Please feel free to contact our support team if you have any problems or concerns: 1) Read the AKNES store page introduction, by Amazon message. 2) Email. 3) By AKNES official web. - Contact informations there.

Instructions for calibrating the joysticks/triggers?

1. In the powered-on state,hold [LB + RB + Minus + Plus] for 8 seconds, the Status LED will blink.

2. Rotate joysticks slowly 2–3 times. Slowly press the triggers to the bottom 2–3 times.

3. Press the same buttons combination to complete.

How to enable the zero-dead zone mode on the joysticks?

In power-on state, press and hold the Minus (-) and Plus (+) buttons for 5 seconds to toggle the zero-dead zone mode on/off.

Can I connect this controller to Switch 1/2?

Yes.

1. Update the firmware to the latest version or beta.

2. With the controller turned off, hold Y and turn on the controller.

3. Connect to your Switch 1/2.

Is the Motion Control available on both Windows and Android?

Yes, it can be configured as the left joystick / right joystick through the Ultimate Software V2.

Does it support the mobile version of the software?

No, it only supports the Windows/macOS version of Ultimate Software V2.

Compatibility - 2.4G/Wired for Windows & PC, Steam Deak, Bluetooth for Android. 1000Hz Polling Rate under both 2.4G and Wired connections.
Connects to Switch 1/2 (2.4G only) - 1) Update the firmware to the latest version or beta. 2) With the controller turned off, hold Y and turn on the controller. 3) Connect to your Switch 1/2. Support six-axis gyro motion.
TMR Joysticks - Offering higher sensitivity, greater precision, enhanced durability, and reduced energy consumption.
Dual Trigger Modes - Quickly switch between non-linear Tactile Triggers and Hall Effect Linear Trigger modes to adapt to various gaming needs.
4 Extra Buttons - Enhance control with extra R4/L4 bumpers and PR/PL back paddle buttons, all programmable and mappable to your preferences.
Customizable 6-axis motion control. Turbo function and Rumble vibration. Support 8BitDo Ultimate Software V2. 1000mAh rechargeable lithium battery.
RGB - Personalize your gaming setup with three modes of RGB lighting, allowing adjustments to brightness, color, and speed.
Rely on AKNES for exceptional customer support. Contact us anytime for assistance—we're always here to help. Visit our store page to learn more about us.

From the brand

Xbox Controller

PC Controller

Top Recommend

About GameSir and Our Store

MasTechBox Store is GameSir Sales Agent. GameSir is the leading brand of game controllers, was founded in Hong Kong, China in 2013.

About Our Mission

Spare no effort in creating the first four-in-one unique mobile gaming ecosystem, integrating Content, Platform, Software and Terminals into the industry of mobile games.

About After-service?

12-month Replacement Service, If you have any problem of the product, please send message via amazon to us, we will reply you in 24 h. If it's provlem of the product, we will give you solution to solve it.

WIRED XBOX CONTROLLER - The officially licensed Xbox controller works for Xbox One, Xbox Series X|S, and Windows 10/11. The GameSir G7 Controller provides the smoothest and ultimate gaming experience with minimal latency (a low response time <0.004s). The detachable 3m USB-C cable gives you the freedom to play from your desired spot in the room.
TWO CUSTOMIZABLE FACEPLATES - The two faceplates empower you to paint and customize the Xbox controller to your heart's content, without taking apart the controller. Enjoy expressing yourself when customizing, whether it's for you or your loved one. Make the G7 Xbox gamepad a unique one in your hand.
3.5MM AUDIO JACK - Plug your favorite headset into the built-in 3.5mm audio jack and quickly control the volume on the fly without any software, whether it's the master or voice chat volume. You can even easily mute your mic with a short press on the mic mute button.
CUSTOMIZABLE GameSir Nexus - GameSir Nexus brings more customization to your controller. Create controller profiles by mapping buttons, adjusting stick and trigger zones, configuring vibration levels, etc. Save up to 3 profiles and use any you prefer when gaming starts. The software also allows you to update the firmware for the Xbox controller.
OUTSTANDING GAMING EXPERIENCE - The GameSir G7 wired controller is equipped with ALPS 3D joysticks, Hall Effect triggers, Microswitches (ABXY), and 2 additional back buttons, giving you smooth and precise 360° control. Additionally, clickable LS/RS buttons provide additional input options for play, so you can enjoy an enhanced gaming experience.
TOTALLY IMMERSIVE GAMING - Two distinct rumble motors in the grips provide strong and subtle vibration. Two motors behind the triggers provide vibration feedback to your fingertips. With the impulse triggers, experience the real and precise feedback of impacts, engine roars, and driving over surface irregularities.
ERGONOMIC DESIGN - Textured grips on the bumpers and triggers keep your fingers non-slip during rapid actions. The Xbox controller provides the ultimate non-slip comfort no matter how long you play.

Item Features:

--- A brand new and genuine cpu & gpu cooling fan set .
--- # Wires To Connector : 4

Compatible Model:

--- for F117-VC F117-VD F117-VG F117-VB2s F117-VD3s

Compatible Part Numbers:

--- 1323-01AU000

Package Includes:

--- Gpu Cooling Fan + Cpu Cooling Fan
--- Thermal Paste

Note:

Please check your Cooling Fan and compare it with our listing photo to ensure that this is the item you need. Please be informed that using your laptop model and fan part number is not sufficient basis to identify the correct replacement because they might have different appearance, screw alignment, pin connector and might not work at all series. It would be better to remove your current fan from your laptop and compare it with the picture contained within the listing. Also please be informed that our item are all sorted according to compatible laptop models. You will receive any of the part numbers mentioned above. All are compatible replacement. It can be used interchangeably. Photo is for reference only.
Date First Available ‏ : ‎ June 18, 2024
Manufacturer ‏ : ‎ SYW·pcparts
ASIN ‏ : ‎ B0D7CPB7VZ
Country of Origin ‏ : ‎ China

Information: This is the Cpu and Gpu Fan Assembly for F117-VC F117-VD F117-VG F117-VB2s F117-VD3s laptop / notebook.Please be sure to match photos and part numbers before purchasing.
Comp. Models: for F117-VC F117-VD F117-VG F117-VB2s F117-VD3s
Part Number: 1323-01AU000
Package Includes:cpu fan+gpu fan, and thermal grease

Product Description Luling Arts HyperX Quadcast Microphone Boom Arm

Luling arts focuses on Microphone stand and microphone accessories,also photography, video, and music equipment,Health & Household.We are happy that life with Luling arts products is becoming more convenient and easier. We are still improving our products & services,provide comfortable, superior and straightforward products as we aim to help you spread care for your family.

Luling Arts Microphone Arm Stand for HyperX Quadcast,Blue Yeti. Microphone Arm Desk Mount Mic Arm for Blue Yeti

Rotation angle: 360°

Maximum support weight: 4.4lbs/2kg

Material: High-quality & sturdy steel

Upgraded Max.Desk Clamp:contact area 47.5cm2,2.7''/70mm thick.

Adapter: 3/8" to 5/8" and 5/8" to 1/4" Compatible with Blue Yeti,Yeti Nano,AT2020,AT2020USB+,Snowball iCE etc

Luling arts microphone stand is adjustable and versatile,360-degree microphone positioning needed in broadcast studios,voice over studios, or at your computer desk at home.desk clamp allows for superb adjustment and positioning.Easy to adjust position and angle, great choice for podcasting and radio or YouTube interviews,show your perfect voice.

Upgraded Desk Clamp

Upgraded Table Clamp:The new upgraded desk clamp contact area from 38 cm2 to 47.5 cm2. the headset hook is integrated into the desk clamp.360° full rotation.easily adjust it to get the best pickup.

Strong Loading Capacity

This Mic Boom Arm made of 5 tubes and the tubes thickness from 0.3'' to 0.5''. max load capacity of the stand is 3.3 lb.the heavy duty stand will hold your microphone or webcam tighly without dropping or shaking.

High-quality & Super-tension Springs

Made of high Grade double springs and Super-tension Springs,the suspension boom scissor arm stand in fully adjustable in all parts. The arms of the stand are extensible in 135° back and forth, and 180° up and down.

Compatibility Microphone diameter of 35-52mm Mic Shock Mount

Excellent Shock Mount Effect: The diameter of the mic clip can be changed by adjusting O-rings on shock mount, has a hole diameter of 52mm. high rubber rope design which makes the microphone more convenient to install and prevent it from falling.

Microphone Stand with Shock Mount

The high-quality shock mount fits for microphones with an outer diameter of 35-52mm (Not fit for Bule Yeti). There is a plastic adapter come with the shock mount. If the metal one is not suitable, it can be temporarily replaced by the plastic one.

Compatibility most microphones:HyperX Quadcast,AT2020USB+,AT2020,AT2035,Fifine K699B,MPM-1000,NW800,NW700 and more.

Microphone Arm with Screw Adapter for Blue Yeti Nano,HyperX Quadcast,Blue Snowball,Audio-Technica,Fifine,Shure SM7 and more Condenser Microphones

Add to Cart Add to Cart Add to Cart Customer Reviews 4.4 out of 5 stars 8,833 4.3 out of 5 stars 120 4.4 out of 5 stars 8,833 4.4 out of 5 stars 315 4.5 out of 5 stars 884 Price $24.99$24.99 — — $49.99$49.99 $44.99$44.99 Compatibility microphone stand microphone stand with phone holder heavy duty microphone arm Snowball microphone arm blue yeti microphone stand
4.4lb Max Load Mic Arm:Luling Arts mic arm with Shock mount is made of 5pcs sturdy steel,is not the old 4pcs thin steel tube in the market.the thickness of its arm tube is improved from 0.39 inches to 0.55 inches,sturdy enough to keep mic well placed, no "dip" or "sink". Freely adjust the boom arm.
Upgraded Microphone Arm Desk Mount :This new microphone arm desk mount contact area from 38 cm² to 47.5 cm²,Easily clip to any desk up to 2.7''/70mm thick.the headset hook is integrated into the desk clamp, added flexible adjustment screw adjust mic body stand prevent pop up.
Mic Stand with Shock Mount :Please noted the shock mount is not fit for Blue Yeti,support hole diameter of 52mm mics. protect the microphone all-around with high rubber rope design which makes the microphone more convenient to install and prevent it from falling. the filter with 2 screen can blocks and dissipates air blasts, reducing its velocity to get good sound.
Two Universal Compatibility Microphone Boom Arm Adapter: Wide Compatibility 5/8 connector compatible by Blue Yeti,hyper x ,Shure,Blue Snowball,Fifine, AT2020USB+ mics and other Mics standard shock mounts.1/4 connector compatible blue yeti nano,Logitech Webcam,Camera,RingLight.
Arm Kits All in One Bulk:Package includes all the items you need for studio recording and live sound, a microphone stand, a table mounting clamp, a 3/8" to 5/8" metal screw adapter to make it perfect for blue yeti and other microphones, 5/8" to 1/4" adapter for blue yeti nano,a pop filter, a shock mount and cable ties, easy to assemble and carry.