ASUS 2.5Gbps Ethernet Over Coax Adapter Starter Kit: High Speed Internet and More: Available now at [price_with_discount]

The ASUS MA-25 Coax to Ethernet Adapter (MoCA adapter) leverages the existing coaxial cable wiring used in your home for TC and internet services to create a MoCa network and extend your WiFi coverage and bandwidth. With MoCA, you can get up to 2.5Gbps wired backhaul connection speeds, with the added convenience of being able to place your mesh router near any active coax to establish a dead-zone-free mesh WiFi Network. Disclaimer: Actual data throughput and WiFi coverage will vary from network conditions and environmental factors, including the volume of network traffic, building material and construction, and network overhead, result in lower actual data throughput and wireless coverage. Fast and Reliable MoCA network: Up to 2.5 Gbps networking by using active home coaxial connectionsSecurity made simple: hassle-free, button-enabled commercial-grade MPS securityLess interference from DOCSIS 3.1 cable modems: an easy band mode switch ensures the best connection all the timeMore satisfying gaming experiences: Ethernet-like network performance for lag-free gameplay.Sustainable design: 69% of the housing is made of post-consumer recycled plastic, and the device is packaged with FSC-certified paper.

The ASUS MA-25 Coax to Ethernet Adapter is a device that utilizes the existing coaxial cable wiring in a home to create a MoCA network, which can extend WiFi coverage and bandwidth. With MoCA technology, users can achieve up to 2.5Gbps wired backhaul connection speeds, allowing for a reliable and fast network connection. This adapter also allows for the placement of a mesh router near an active coaxial outlet, eliminating dead zones in the WiFi network.

In terms of security, the ASUS MA-25 features hassle-free, button-enabled MPS security, providing users with commercial-grade protection. Additionally, the adapter offers less interference from DOCSIS 3.1 cable modems, ensuring a stable and consistent connection. This, in turn, leads to improved gaming experiences with Ethernet-like network performance for lag-free gameplay.

In terms of sustainability, the ASUS MA-25 Coax to Ethernet Adapter is designed with 69% of the housing made from post-consumer recycled plastic. Additionally, the device is packaged with FSC-certified paper, aligning with eco-friendly practices.

It is important to note that actual data throughput and WiFi coverage may vary depending on network conditions and environmental factors, such as the volume of network traffic, building materials, construction, and network overhead. As a result, users may experience lower actual data throughput and wireless coverage than the maximum potential promised by the adapter.

Overall, the ASUS MA-25 Coax to Ethernet Adapter offers users a fast, reliable, and sustainable solution for extending WiFi coverage and improving network performance in their homes.

Price: $149.99 - $119.99
(as of Aug 23, 2024 14:36:35 UTC – Details)


Related Posts
Read More

Machenike F117 Battery Replacement Guide: Available now at [price_with_discount]

The Battery Compatible with Machenike F117 Break/F117-B/F117-B1/F117-B2CK/F117-B3/F117-B6/F117-B6Cp/F117-B6D/F117-Break/F117-FP/F117-FP6/F117-FP6R/F117-FP6R2/F117-FP6t/F117-FP7/X8Ti/X8Ti Plus
【Compatible models】Battery Compatible with Machenike F117 Break/F117-B/F117-B1/F117-B2CK/F117-B3/F117-B6/F117-B6Cp/F117-B6D/F117-Break/F117-FP/F117-FP6/F117-FP6R/F117-FP6R2/F117-FP6t/F117-FP7/X8Ti/X8Ti Plus,PN:GK5CN-00-13-3S1P-0/GK5CN-00-B-3S1P-0,4000mAh,11.4V
【Product Features】No Memory Effect, Over-Charge, Over-Discharge, Over-Heat, Over-Current and Short-Circuit Protection.
【Perfect Replace】High capacity circulatory function, perfect replace your original batteries.
【Quality certification】Our battery has a strict quality control standards, has passed the ISO9001, RoHS, and CE certified.The battery was tested many times before it was delivered to the customer. A+ cells ensure longer battery life.
【After-sales service】Buy with confidence. We guarantee 24-hour email support, Please kindly check the compatible Voltage, Cell Size and Connector Type for best fit.
Read More

PDP Victrix Pro BFG Wireless Gaming Controller for PS5, PS4, and PC – Customizable Esports Gamepad with Remappable Buttons & Modular Triggers, Paddles, D-Pad, Fightpad – White Edition

Create the ultimate controller for any game using the reversible left module for either the standard PlayStation stick configuration, or offset sticks. Fans of fighting games can swap in the Fight Pad module to replace the right stick with 6 tactile microswitch buttons. Fit your play style by equipping your favorite D-pad, analog stick caps, or gates all conveniently stored in the included carrying case. With the free Victrix Control Hub app for PC you can map buttons, recalibrate sticks and triggers, adjust deadzones and EQ settings, run diagnostics, update firmware, and more. Using the four mappable back buttons, you can take down ops quickly and efficiently, plus create three button mapping profiles to maximize your speed in any game. Our patented, multi-position Clutch Triggers™ have five trigger stops and hair trigger mode to reduce travel distance so you can react even faster. With the Mode Switch, gamers can choose to play on PS5, PS4, or PC (using X input), while the Connection Switch on the back lets you toggle between wired and wireless mode. Experience the new standard in gaming with the officially licensed, Pro BFG Wireless Controller.

Play wirelessly on console using the USB dongle or use the included cable to plug in the controller for tournament play and even faster inputs
Modular design for custom configuration with reversible left module, standard right module, 6-button fight pad module, 4 interchangeable sticks, 3 different D-pads, and 4 gates
Patented Clutch Triggers with 5 trigger stops and hair trigger mode and 4 mappable back buttons for faster reactions
Re-map buttons, reconfigure triggers, adjust deadzones, and more customizations with the free Victrix Control Hub app on PC
PlayStation Official Licensed Product

Tech Specs

Processor:
500 MHz Dual-core ARM-7
Victrix proprietary MCU, firmware upgradeable

Compatibility:
PlayStation 5, PlayStation 4, and PC (X-Input compatible)

Connectivity:
Wireless (USB-A mini dongle) or Wired (USB type A to type C cable), switch selectable

RF Wireless Transceiver:
2.4 GHz Dual-core Victrix proprietary SOIC

Input Latency:
5ms

Buttons:
High response elastomer membrane (standard module), Low damped
microswitch (FG module)

Touchpad:
PlayStation 5 standard

PCB:
Victrix Custom

Audio Support:
3.5mm 4-pole Headset Jack, PS5 console compatible 3D Audio

Full Wireless and Wired Compatibility: With the Mode Switch, players can easily swap between PlayStation 5, PlayStation 4, and PC (using X input) devices.
Modularity: The reversible left module allows for both the standard PlayStation stick configuration as well as offset sticks. Fans of fighting games can swap in the Fight Pad module, replacing the right stick with a six button layout with microswitches
Four Mappable Back Buttons with User-Configurable Profiles: Players can map the back buttons on the fly with the Profile Button, and save up to 3 unique profiles for button mappings
Patented Multi-Position Clutch Triggers: Boasting 5 different stopping points, the patented clutch triggers allow players to tune the trigger pulls to their specific liking, whether they want hair triggers, standard triggers, or something in the middle
Low Latency Audio with EQ Profiles: The Pro BFG delivers the highest possible audio quality through the controller’s 3.5mm Headset Jack. The controller is also compatible with Sony 3D Audio on PS5
Victrix Control Hub Customization App: Players can make their controller as unique as their playstyle with the free Victrix Control Hub. The Hub allows players to configure button and EQ settings, run diagnostics, and update the controller’s firmware all in one place.
Read More

“Official NHL Nashville Predators Jersey Skin for Bengoo G9000 Gaming Headset by Skinit”: Available now at [price_with_discount]

Personalize the look on your Gaming Headset with the Nashville Predators Jersey skin compatible with the BENGOO G9000 by Skinit. All Nashville Predators decals compatible with the BENGOO G9000 Gaming Headset are cut and crafted with premium 3M vinyl and built to perfectly fit on your gaming headset without interfering with your game.
Comes with 1 skin compatible with BENGOO G9000 Gaming Headset
Precision cut for a flawless fit
3M vinyl decals printed with 3D Print Technology
Made in the USA
3M adhesive backing - easy on, easy off & residue-free
Read More

BoxWave DirectSync PD Cable (10ft) – USB-C to USB-C (100W) for Ayaneo 2 – Jet Black: Available now at [price_with_discount]

BoxWave Cable Compatible With Ayaneo 2.

When you need to charge your Ayaneo 2, grab the conveniently long 10-foot, durable, and versatile
DirectSync PD Cable from BoxWave!

Capable of shuttling up to
100 WATTS of PD Power through its 10-foot braided cable, the DirectSync PD Cable is the cable you need to charge your Ayaneo 2 and other high powered devices, including Laptops! Beware of other cables which may stop working or even cause fire hazards! The DirectSync PD Cable is rated to handle the bandwidth and rate at which your Ayaneo 2 requires!

Made with 10 feet of
HIGH GRADE NYLON materials, the DirectSync PD Cable can handle even the harshest environments. This cable is strong but flexible to accommodate your charging needs in any situation. No more maneuvering in awkward positions while your Ayaneo 2 is charging close to the wall, sit back comfortably and allow the 10-foot cable reach YOU!

The DirectSync PD Cable is equipped with durable,
RUBBERIZED GROMMET strain reliefs on BOTH connectors to prevent cable fraying and eliminate connection issues.

Plug the DirectSync PD Cable into your computer for
AMAZINGLY FAST data transfers WHILE charging your Ayaneo 2!

Simply plug in the USB Type-C Connectors to your charger, and the other end into your Ayaneo 2 to
BEGIN charging!

Charge your Ayaneo 2 even from across the room with confidence with the 10-foot BoxWave DirectSync PD Cable!

🔋 [100 Watt PD] BoxWave Cable Compatible With Ayaneo 2. Capable of shuttling up to 100 WATTS of PD Power through its 10-foot braided cable, the DirectSync PD Cable is the cable you need to charge your Ayaneo 2 and other high powered devices, including Laptops! Beware of other cables which may stop working or even cause fire hazards! The DirectSync PD Cable is rated to handle the bandwidth and rate at which your Ayaneo 2 requires!
🔗 [10-Foot Braided Cable] Made with 10 feet of HIGH GRADE NYLON materials, the DirectSync PD Cable can handle even the harshest environments. This cable is strong but flexible to accommodate your charging needs in any situation. No more maneuvering in awkward positions while your Ayaneo 2 is charging close to the wall, sit back comfortably and allow the 10-foot cable reach YOU!
💪 [Strain Relief] The DirectSync PD Cable is equipped with durable, RUBBERIZED GROMMET strain reliefs on BOTH connectors to prevent cable fraying and eliminate connection issues.
🏃 [High Speed Data Transfers] Plug the DirectSync PD Cable into your computer for AMAZINGLY FAST data transfers WHILE charging your Ayaneo 2!
🎖 [Easy to Use] Simply plug in the USB Type-C Connectors to your charger, and the other end into your Ayaneo 2 to BEGIN charging!