“Skytech CON Remote Control: Power Your Fireplace with Ease”: Available now at [price_with_discount]

The Skytech CON remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. The system is operated manually from the transmitter. The system operates on radio frequencies (RF) within a 20 ft. range using non-directional signals. The system operates on one of 255 security codes that are programmed into the transmitter at the factory; the remote receiver must learn the transmitter code prior to initial use. This remote control SYSTEM offers the user a battery-operated remote control to power a ON/OFF latching solenoid such as those used with gas valves used in some decorative gas logs, gas fireplaces and other gas heating appliances. The circuit uses the battery power from the receiver to operate a latching solenoid. The circuit has reversing polarity software which reverses the positive (+) and negative (-) output of the receiver’s battery power to drive solenoid (ON/OFF FLAME) or open/close. The SYSTEM is controlled by the remote transmitter. The transmitter operates on a 12V battery made specifically for remote controls and electronic lighters. Before using the transmitter install the 12 volt (A-23) battery in the battery compartment. It is recommended that ALKALINE batteries always be used for longer battery life and maximum operational performance. The transmitter has ON and OFF functions that are activated by pressing either button on the face of the transmitter. When a button on the transmitter is pressed, a signal light on the transmitter illuminates to verify that a signal is being sent. Upon initial use, there may be a delay of three seconds before the remote receiver will respond to the transmitter. This is part of the system’s design. If the signal light does not illuminate, check the position of the transmitter’s battery. Operates Latching Solenoid Gas Valve Systems – DOES NOT REPLACE SKY-1001-ABasic 2-button transmitter with On/Off controlReceiver outputs up to 6.3 Volts of DC power to operate a latching solenoid (unit will not work with millivolt systems)Ultimate convenience of a cozy fireplace with the push of a buttonIncludes transmitter, receiver, cover, wall clip, installation instructions, batteries

The Skytech CON remote control system is a safe and user-friendly remote control system for gas heating appliances. It operates on radio frequencies within a 20 ft. range and uses one of 255 security codes to ensure reliability. The system is battery-operated and can power an ON/OFF latching solenoid for gas valves used in gas logs, fireplaces, and other heating appliances. The transmitter operates on a 12V battery and has ON and OFF functions that are activated by pressing buttons on the transmitter. The receiver outputs up to 6.3 Volts of DC power to operate the latching solenoid. The system includes a transmitter, receiver, cover, wall clip, installation instructions, and batteries. It is recommended to use alkaline batteries for longer battery life and maximum operational performance. Upon initial use, there may be a three-second delay before the receiver responds to the transmitter. If the signal light on the transmitter does not illuminate, check the position of the battery. The Skytech CON remote control system is designed for latching solenoid gas valve systems and does not replace the Sky-1001-A system. It offers the convenience of controlling gas heating appliances with the push of a button.

Price: $147.00 - $129.95
(as of Aug 13, 2024 14:11:16 UTC – Details)


Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts
Read More

“MAONO XLR Podcast Dynamic Microphone with Boom Arm: Ideal for Vocal Recording, Streaming, and Gaming”: Available now at [price_with_discount]

Product Description PD100 xlr microphone Level up Your Vocal Recording

Works Great With Audio Interface,allows you more flexible operation.

XLR podcast microphone For Beginners And Pros Alike

you'll be able to grow with it the more you learn about audio recording and editing

xlr mic Effective Game Interaction

This mic's cardioid pickup, suppresses other noise with a clear sound that make your voice stand out

XLR Singing Microphone Clear Audio

Nice, clear, rich sound, captures the nuances of your voice characteristics.

1 Podcast 2 Content Creation 3 Gaming & Live Streaming 4 Singing Recording PD100S Podcast Dynamic Microphone recording podcast microphone Extendable Boom Arm Stand

Easy to stretch and flexible adjust for suitable angles.

podcast mic recording Upgraded XLR Connection

PD100S XLR dynamic microphone is tending toward a stable and balanced voice, maintaining clarity and consistency.

Built-in 3/8’’ And 5/8’’ Threads To Easy Installed With Most Mic Stands podcast micpodcast mic studio vocal microphonestudio vocal microphone 270° Adjust Microphone Angle

Adjust the thumbscrew to change the angle of the XLR streaming microphone. More angle and height adjustments allow you to find the most suitable recording distance when using the gaming dynamic mic, resulting in the desired audio output.

microphone for studiomicrophone for studio The Table Clip's Width Requirements

Suitable for square desks with a thickness ranging from 0.78 inches to 1.96 inches.

Does the PD100S microphone kit come with an XLR cable?

Yeah, 6.56 ft (2 M) XLR cable

Does the PD100S boom arm microphone require an audio interface?

Yeah, MAONO PS22, AME2 audio interface

Podcast Dynamic Microphone Series Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 469 4.6 out of 5 stars 469 4.6 out of 5 stars 469 4.4 out of 5 stars 1,258 4.6 out of 5 stars 202 Price $52.99$52.99 $39.99$39.99 $49.99$49.99 $59.99$59.99 $149.99$149.99 Connection XLR XLR USB-C USB/XLR USB/XLR Acoustic Principle Dynamic Dynamic Dynamic Dynamic Dynamic Mute Button No No No No Yes Gain Knob No No Yes No Yes Volume Control No No Yes Headphones Volume Adjustment Yes Headphones Jack No No No Yes Yes Stand Boom Arm Desktop Stand Desktop Stand Desktop Stand Desktop Stand Material ALL Metal Body ALL Metal Body ALL Metal Body Metal ALL Metal Body Suitable for Podcast/Vocal/Gaming/Streaming Podcast/Vocal/Gaming/Streaming Podcast/Vocal/Gaming/Streaming Podcast/Vocal/Gaming/Streaming Podcast/Vocal/Gaming/Streaming
Clear & Natural Sound: The PD100S dynamic XLR microphone focuses on podcasting, vocal recording, streaming, and content creation. Built-in dynamic core and inner double layer pop filter, thanks to the noise isolation technology, better attenuation of plosive. Well-balanced reproduction across a wide frequency response range 60-14kHz, delivering clean and mellow audio. Mid-frequency protrusion,works great for podcasters, streamers, and Content creators
XLR Connection For Podcast Equipment Bundle: The PD100S boom arm mic is well-connected and noise-free operation, the podcasting microphone works great with your studio setup, like Maonocaster AME2, audio interface, or mixer, improves your vocal audio flexibility to make you explore various type of music recording singing. The XLR streaming microphone isolates the pristine and accurate sound from ambient noise via balanced transmission with greater anti-interference and fidelity
Start Your Home Studio Here: The dynamic podcast microphone features a cardioid pattern and "Talk to the Mic Top"pick-up way, so that the dynamic recording microphone captures every detail of your voice with smooth and more depth, find the voice you want and own it, and let your sound more center and front, so your streaming or recording will more clear, natural. keeping you in the spotlight, and letting you have a good performance when live streaming or podcasting
Stylish Compact Design: This XLR microphone with metal body, sleek looks, compact size, makes it portable and durable. The mic with arm stand, make the microphone closer to you, the adjustable boom arm allows for a wide range of positions and angles for your use case, easily set it up in a place that works best for your setup. Built -in 5/8"and 3/8" inch threads to easy installed with most mic stands
All In One Microphone Set: XLR dynamic microphone with arm stand * 1, 6.56 ft XLR cable * 1,user manual * 1. Start your broadcast journey with a affordable microphone set here
Read More

“Enhanced Gaming Experience: G2000 Gaming Headset with Surround Sound and Noise Cancelling Mic”: Available now at [price_with_discount]

From the brand 品牌故事背景图3品牌故事背景图3

Portable Fan

Portable fan

Gaming Headset

Gaming Mouse

External CD DVD Drive


【MULTI-PLATFORM COMPATIBILITY】 Support PS5, PS4, PS4 Pro/Slim, Xbox One S/X, PC, Nintendo Switch/3DS (audio), PSP, Laptop, Tablet, iPad, Mobile Phone ( Work by connecting with 2-in-1 adapter ) and Computer. Note: An extra Microsoft Adapter is required (Not Included) when connecting with an OLD VERSION Xbox One controller.
【IMMERSIVE GAMING EXPERIENCE】 Stunning LED lights designed on earcups quickly blasts the atmosphere of your game. High precision 50mm magnetic neodymium driver provides you vivid sound field, high quality stereo sound for game playing.
【GREAT COMFORT TO WEAR】Extreme soft and ventilate Protein ear cushion ensures the great comfort for long time wearing,simultaneously with excellent isolation of ambient noise. Headset with height adjustable headband fit for almost all head sizes.
【NOISE ISOLATING MICROPHONE】Over-ear headphones with 120 degree rotating microphone, background noise can be perfectly reduced for clear voice pick up and your messages can be clearly delivered without distortion in the heat of gaming.
【IN-LINE SOUND CONTROLS】Volume control and mute switch are close at hand for quick audio adjustment, the extra-long (2.2meters) and military grade durable braided wire enables you position audio controls right at where you need them.
Read More

“8bitdo Pro 2 Wired Controller: Officially Licensed Gamepad with Hall Effect Joysticks for Xbox Series X|S, Xbox One, Windows 10/11”: Available now at [price_with_discount]

Product Description 8BitDo Pro 2 Wired controller for XBOX and Wins Pro 2 Wired controller for XBOX and Wins

The Licensed Xbox controller

Upgraded hall joysticks

8BitDo Pro 2 Wired controller for XBOX and Wins Cable: 9.84 ft. / 3 m 8BitDo Pro 2 Wired controller for XBOX and Wins Connectivity

The wired USB 3.5mm audio jack supports standard CTIA connector

8BitDo Pro 2 Wired controller for XBOX and Wins Built-in motors 1 8BitDo|XBOX 2 Compatibility 3 3.5mm Audio Jack 4 Trigger vibration 8BitDo Pro 2 Wired controller for XBOX and Wins8BitDo Pro 2 Wired controller for XBOX and Wins 8BitDo Pro 2 Wired controller for XBOX and Wins8BitDo Pro 2 Wired controller for XBOX and Wins 8BitDo Pro 2 Wired controller for XBOX and Wins8BitDo Pro 2 Wired controller for XBOX and Wins 8BitDo Pro 2 Wired controller for XBOX and Wins 8BitDo Pro 2 Wired controller for XBOX and Wins Campatibility Xbox Series X, Xbox Series S, Xbox One, Windows 10 and above Connectivity Wired USB, 3.5mm audio jack supports standard CTIA connector Special Features 2 Pro back paddle buttons, Ultimate Software on Xbox, PC 3.5mm audio jack, Trigger vibration, Grip vibration Dimension / Weight 153.6*100.6*64.5mm; 318g Cable length 9.84 ft. / 3 m Includes Pro 2 Wired Controller for Xbox; Instruction manual

What kinds of headset is the the controller compatible with? Is it compatible with the Xbox headsets?

Make sure your headsets has a 3.5mm jack (4-segment, downward compatible with 3-segment). The 4-segment jack has microphone funtion(The 3-segment is without microphone function) and international standard CTIA. Compatible with the Xbox headset.

How do I control the volume of the microphone and earphones/headsets?

Home button + D-pad(↑↓) to adjust the volume.

Home button + D-pad(← →)to adjust the balance between voice and game volume.

The controller vibrates when the volume is 50%(Default) and the beep sound appeared when the volume to maximum or minimum

What special features does the trigger button have on Ultimate Wired Controller Designed for Xbox?

The trigger button adopted with hall sensor. At the same time, the trigger button is equipped with independent rumble motor, which can be more immersive in games.

What kinds of functions can be set on 8BitDo Ultimate Software for Pro 2 Wired Xbox Controller?

It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity and vibration control.

The macro function is not available on this controller.

Can I disable the joysticks(L3/R3) inputs if I map them to the back buttons P1/P2?

Yes you can. Just set L3/R3 as “Null” in the 8BitDo Ultimate Software and map them to P1/P2.


Official License for Xbox, Compatible with Xbox Series X/S, Xbox One and PC Win10 and above.
Hall Joystick offer comfort, long-life and enhanced gaming accuracy.
With 8Bitdo Ultimate Software, on Xbox and PC. You can quickly switch profiles on the fly for different games with the custom profiles.
Two extra Pro-level Back Buttons and 3.5mm Audio Jack for headphones.
Perfect classic d-pad, non-slip gaming experience design, trigger vibration, enhanced grip & 3 meter cable
Shop with confidence and enjoy top customer support from AKNES. Contact us if you run into any issues and we'll be happy to assist you. Read more about us on our store page.